"This image " by Toshiyuki IMAI is licensed under CC BY 2.0

Yoodley is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

All set for playing your favourite game tonight but suddenly you find your Wii remote cursor not appearing on the screen? This surely could be a major turn-off for those who barely get time to spend playing games and then find this issue all of a sudden. However, you don’t need to worry as all you need to do is to go through this guide and you surely will end up finding a permanent solution for the issue Wii remote cursor not appearing on the screen. So let’s get started.


Why my Will remote cursor isn’t appearing on the screen?

There are many reasons for your remote cursor not working. Although it is more likely to be a faulty malfunction of your remote at times reasons such as dirt in your remote or battery running out or the sensor bar glitches could also be the reason. 


How to fix Will the remote cursor not appearing on the screen?

If you’re also unsure of what to do how to do if your Will remote cursor has stopped working, then the following are the quick fixes that you surely can rely on. Check them out here-


1- Replace your remote’s battery

So the very first thing you need to do is to check your remote’s battery as it might happen that your remote ran out of battery or the battery has weakened down due to which you’re not able to use it properly. In most cases, when something like the remote not working happens, people often go to technicalities and forget the basics and thus, you should not repeat the same mistake.

Before you move to any other point mentioned here, first try replacing your remote’s battery and then use it. The chances are pretty high that it will work. However, if you have recently changed the batteries, then you can also try removing them and then putting them back as you might have applied them inappropriately.


2- Clean up your controller

The other big reason why your remote’s cursor isn’t showing up is that there might be some dust or dirt particle in the remote and it is bothering it too much. To avoid such a situation, you need to open the controller yourself and check if there are some dirt or dust particles there.

If there is, you need to clean it with a dry brush. However, make sure that you do not use water or your regular cleaner for cleaning it out. If needed, go for wet wipes or a cleaner suitable for electronic devices. For cleaning your remote, the following are the steps to be followed-

  • First, you need to open your remote’s cover plate.
  • Now check if there’s any corrosion there.
  • Use a dry brush and spread it all over.

Note- If the power button is working well and other buttons are not, then the chances are high that you might have mistakenly used it with wet or oily fingers due, and the liquid has gotten inside it. First, use the dry brush and wipe the dirt out and post that, dip the brush in some lukewarm soapy water and apply it on your remote’s button. Make sure that you do not use a lot of soap or water in the mixture. Wipe it with a cloth once you’re done and then insert the batteries again.


3- Check the gyroscope sensor

If you are done with the basics, then take a step ahead and check your Wii remote’s gyroscope sensor. For those who don’t know, it is basically the sensor of your remote via which you are able to move your controller throughout the game. With the help of the sensor only, you can make multiple moves without needing a joystick or any third-party tool.

And if your remote’s gyroscope doesn’t work, you won’t be able to make any move through it. To solve this problem, you will have to call an expert or get your remote replaced. But talking about the temporary solution for the same, you can also try downloading the app called reWASD on your smart device and boom, you will have all your Nintendo remote control with ease. Just make a profile there and start using it. 


4- Shut down the Wii

Another hack for the issue Wii remote cursor not working is to shut down your Wii for once and re-start it. This will reinitialize the system and if there’s any faulty error, it will rectify it. All you need to do is to turn off your Wii and unplug it from all the switchboards. Wait for a few seconds and turn it on. Now try using the remote and it should work fine.


5- Call Nintendo

Last but not least, if you have tried all the given methods but got no solution for the same, then it is safe to say that the issue is with the hardware of your remote and thus, you require some technical help for which calling the customer support of Nintendo will be the safest option out of all. Reach them out through their customer support address and discuss the concern regarding the remote. 


Wrapping up,

These were the reliable methods via which it is possible to bring back your Wii remote’s cursor without needing any technical help. However, if you fail to apply any method and need our assistance on the same, please comment below and we will get back to you as soon as possible. Also, if some other method that we haven’t listed worked well for you, please share it with us.




1- How to know if my Wii remote sensor is damaged?

If your Wii remote sensor is damaged or defective, you will not be able to use your remote for any action you want to complete. To know whether your Wii remote sensor is working well or not, you need to check the LCD red light that you need to place for giving any commands through the remote. If the light isn’t on, then know that it isn’t working.

2- How do I fix my Wii sensor bar not working?

If your Wii sensor isn’t working well, you must unplug the sensor bar and then replug it again. It generally will reset your connection and will fix the issue. However, if this method doesn’t work well for you, you can also try giving a reboot to your Wii console and then using the sensor bar on it.

3- How do I reset my Wii remote?

If you want to reset your Wii remote, then you need to remove the batteries from it and then wait until 60 seconds. Now put them back and check if it is working. This method will re-synchronize your Wii remote and will reset it.

4-Is reWASD free to use?

reWASD, the famous reliable mouse remapper app is a licensed app that comes with a 7-day free trial. However, for lifetime usage, you will have to use the premium version of the same. It comes in three categories and each category will come with an additional 3-day trial. If you like the app, you can use the premium version of it and use it as an alternative to your Wii remote cursor.


Please enter your comment!
Please enter your name here