What Is ''Murata Manufacturing Co, LTD'' On Your WiFi?

Yoodley is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Having a sense of security in our network is vital. We need to make sure that no hackers or unfamiliar devices are linked to our network. As a result, seeing an unknown device like Murata Manufacturing makes us uncomfortable.

This means you’re undoubtedly wondering, “Why does Murata Manufacturing have access to my Wi-Fi?”

In the specifics of this article, we shall discuss what “Murata Manufacturing Co, LTD” is and why it is appearing on your WiFi.


What Is “Murata Manufacturing Co, LTD” On Your WiFi?

Murata Manufacturing Co, LTM. is a Japanese corporation that specializes in the production of many types of electronic equipment. Murata Manufacturing Co, Ltd is a Japanese corporation with its headquarters in the city of Nagaokakyo in the prefecture of Kyoto. The company “Murata Manufacturing Co., Ltd.” is involved in the field of electronics, and it supplies diverse electronic components to customers all over the world. The company manufactures and sells a wide range of electronic modules and equipment, which has earned them a reputation as a leader in its area.

The electronic equipment manufactured by the individual Japanese company are divided into three categories: electric, telecommunications, and mechanical. Power supply modules, communication modules, multilayer ceramic capacitors, sensor devices, noise countermeasure components, timing devices, high-frequency components, powerful batteries, and a variety of other products are included in the list.

Murata Manufacturing’s products are not restricted to a certain geographical area; rather, the firm markets its products all over the world, including the United States.

Murata Manufacturing appears to be a well-known brand when it comes to the production of electrical components for a variety of devices, including internet modems, Wi-Fi dongles, home routers, mobile phones, and other similar items.

By disabling Wi-Fi access in the settings of your home gadgets, you may simply determine which of your devices is owned by this company. Check which of your home equipment stopped operating after you disconnected the Murata Manufacturing devices and note which ones it was. Almost certainly, the one that isn’t working right now without Wi-Fi access is the one to point the finger at.


Is your network safety compromised when your WiFi connects to “Murata Manufacturing Co, LTD”?

The name Murata Manufacturing shows next to the MAC address when Murata Manufacturing is found on Wi-Fi. Your computer’s MAC address will most likely be shown as something like “MAC Address:  A8:9C:ED:5B:04:F7 with right next to it the name  (Murata Manufacturing Co.).

For the most part, the rationale is self-explanatory: either it is a smart home device equipped with a wireless radio created by the company, or it is just your smartphone. However, it is possible that you have an intruder on your network if this occurs. This is nothing to worry about though. The most rational explanation to why you are seeing “Murata Manufacturing Co, LTD” is either the following instances:

  • One of your devices is manufactured (or has components manufactured) by Murata Manufacturing. 
  • Someone with a Murata Manufacturing device or component has access to your WiFi network.

In the latter case, your network safety is compromised, but keep in mind that the culprit is not Murata Manufacturing but the individual with your WiFi network credentials.


How to detect if the connection to “Murata Manufacturing Co, LTD” is safe?

We can scan our LAN (Local Area Network) in two methods to ensure that Murata Manufacturing Co, LTD. is a safe connection. The first method includes using Command Prompt and executing various commands, while the second involves utilizing third-party software to detect the devices.

1. Command Prompt IP Scan

To scan your network on a Windows 10 device, open the Search box and enter cmd and follow the instructions below:

  • Activate the command prompt.
  • For Mac, type “ipconfig” or “ifconfig” for Linux. Your computer will then display its own IP address, subnet mask, gateway address, and other information, allowing you to decide which network number to scan. For example, in a Class C IPv4 network, which is typical of most small local networks, your computer’s IP address might be If the subnet mask is, you know that the first three bytes are the network ID (192.168.1) and that your broadcast IP address is
  • Then type “arp -a” into the command line. The “-a” appendage of the command instructs the device to list all the IP addresses located within the ARP cache for the linked network. In other words, the “arp -a” command returns a list of all active IP addresses on the local network. This list is quite useful, as it contains the IP addresses, MAC addresses, and allocation type (static or dynamic) for all active hosts.
  • Optional: Enter the command “ping -t.” The “ping -t” command allows you to execute an extended ping on the list created by the preceding command, testing network connectivity and latency. This will allow you to narrow down which devices may be experiencing or creating issues.

2. Third-Party Software IP Scan

This can be accomplished by any third-party software that you choose to use. The Advanced IP Scanner is one of these. These two ways vary fundamentally in that the software gives you a better sense of which devices are linked.

Only the IP and MAC addresses are returned using the Command Prompt technique. You may also view the addresses, whether the devices are currently connected or disconnected, and the unknown devices in this section of the page.

However, scanning a network for active IP addresses using native commands can rapidly become an overwhelming effort for a single member of staff. The information that can be gleaned from this strategy is very valuable. Ipconfig does show the IP address and MAC address of each active network device, but it’s absurd to expect most IT staff to know the MAC addresses of every machine on the network—and in bigger networks, it’s nearly impossible.

If you’re looking for the fundamental cause of a problem, this knowledge won’t help you get there. It basically provides you with the ability to locate IP addresses and determine whether any are the same or have been altered.


Why is it difficult to disconnect “Murata Manufacturing Co, LTD.” from your Wi-Fi?

When you receive a notification that Murata Manufacturing has connected to your Wi-Fi, the first thing you do is to disconnect your connection immediately.

However, you’ll be surprised to learn that it will automatically return without your knowledge or authorization. Why? Because of a wired connection between the router and the Murata Manufacturing device that you’re now utilizing in your home (as you can see in the picture above). An Android application can also attempt to create a connection between your router and a Murata Manufacturing device, in addition to the above.

As a result, your approval is not required. Even if you directly disconnect the connection, it will automatically reconnect on its own accord.


How to find out which devices connected to your WiFi are manufactured by “Murata Manufacturing Co, LTD”?

It’s difficult to tell which device belongs to Murata Manufacturing Co. First, we must scan our network using the two ways described above, and then we must enable the MAC filter on our router. These are the steps for most routers:

  • Navigate to the router’s settings page.
  • Locate your router’s Security section.
  • There will very certainly be an Advanced Settings tab.
  • Then navigate to the MAC Filtering section or the Access Control menu.
  • After that, we must enable MAC address filtering.
  • In most cases, we must click the Add button.
  • Then, next to Murata Manufacturing, enter the MAC address.
  • Block and Save are the two options. (These two can differ depending on the router.)
  • When you’ve completed all of these steps, check to see if any of the devices that are normally linked to Wi-Fi have lost their connection. The Murata Manufacturing device is the one that does not have a connection.



Electronics is advancing at a breakneck pace. Components made by this company are in high demand. If you own a Samsung, Apple, Xiaomi, Vivo, or Oppo smart device, you can expect Murata Manufacturing to appear on your connected devices list.

Parts were supplied to Huawei and some Samsung devices by the company. It’s quite possible that this is the gadget you’re eyeing. More devices with this signature are on the way. Don’t be surprised if it shows up in a network scan.

Performing a scan of your business and personal networks for unknown devices is a good practice. It gives you a general idea of where your data is going and how many devices you own.

Now that you know why Murata Manufacturing is using your Wi-Fi, you don’t have anything to be concerned about. If you can’t identify it, simply block it and you should be good to use your secure WiFi connectivity again.



1. How to log in to a Murata Router?

To access the configuration page, log in to a Murata Router. Murata’s router web interface is also known as the router’s control panel. All settings are changed and saved here.

Before you can make any modifications to your Murata router, you must first know how to access the login page. To accomplish this, connect the interface and perform any necessary diagnostics and settings as shown below:

  • To begin, connect your Murata router. To access the Murata router setup pages, you must first connect to the router’s network. Begin the connection using an ethernet wire or Wi-Fi.
  • Navigate to in your web browser.
  • Open your browser and type the IP address of the router directly into the address field. The most frequent IP address for a Murata router is If it still doesn’t work, look for the Murata IP default address list for the specific model you’re using.
  • Fill in the username and password for your Murata router. Then, either sign in or enter.


2. How to configure a Murata Router?

When you have access to the Murata admin interface, you will be able to make changes to any of the settings that are currently available. However, don’t make any changes to anything you’re not certain about before you break the network.

Is there anything you can do if your Murata network or router stops working after you make a configuration change?

You can get back to where you started if you make a mistake and break the Murata home network, but you’ll have to hard reset it first, which will require the general 30-30 methods to do so.

Typically, this is the last option. In the meanwhile, if you still have access to the Murata interface, it is still possible to re-login and restore your previous settings.

However, if you write down the original amount before it was changed, this will be much easier to understand.


3. What is a MAC Address?

In the world of networking, there are two types of addresses that we frequently encounter. The IP (Internet Protocol) address comes first, followed by the MAC (Media Access Control) address.

The IP address of your device is the numerical address that it has on the network. Due of its usage in directing traffic to and from your device, the router might be very useful in this situation. Because it is the actual address of your device, the MAC address is a little different than the IP address.

It is made up of six pairs of hexadecimal digits that make up MAC addresses. Due to the fact that our network cards contain physical addresses, we refer to them as physical addresses in addition to MAC addresses. They are employed in MAC filtering for high-performance networks.


Read More

  1. What is Huizhou Gaoshengda Technology Co., Ltd. on my WiFi?
  2. What is [DoS attack: ACK Scan] ?
  3. What Is ”hon Hai Precision Ind Co Ltd” On My Network?
  4. What Is Arris Group Inc on My Network?
  5. What is Espressif Inc Device On My Network?
  6. What Is Wistron NeWeb Corporation On My WiFi Network?


Please enter your comment!
Please enter your name here